Groz Tap Hand C/Steel Set M18 X2.5
GROZ TAP HAND CARBON STEEL SET M18X2.5
Taps are used for cutting internal threads in predetermined holes, These perform best in materials where the cutting action results in chips which break up readily and do not present problems of chip disposal, Taps are usually used in sets of 3: taper, second and bottom
Taper
Used to provide a quick & easy start, but this will not cut the thread down to the bottom of the hole
Second
Used to increase the size of cut
Bottom
Used for follow through right to the bottom to obtain full depth of thread.
As opposed to straight threads such as BSW, UNC, UNF, Metric etc, taps with parallel threads are shorter in length and are used for parallel threading.
These are used in sets of 2, All taps are right hand taps
CODE: GRO6568
BARCODE: 8901486096186
HEIGHT: 2.5cm
LENGTH: 17.5cm
WIDTH: 8.0cm
WEIGHT: 0.37kg
NOMINAL SIZE: 18 inch
PITCH: 2.50
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Groz Tap Hand C/Steel Set M18 X2.5
Groz Tap Hand C/Steel Set M18 X2.5
GROZ TAP HAND CARBON STEEL SET M18X2.5
Taps are used for cutting internal threads in predetermined holes, These perform best in materials where the cutting action results in chips which break up readily and do not present problems of chip disposal, Taps are usually used in sets of 3: taper, second and bottom
Taper
Used to provide a quick & easy start, but this will not cut the thread down to the bottom of the hole
Second
Used to increase the size of cut
Bottom
Used for follow through right to the bottom to obtain full depth of thread.
As opposed to straight threads such as BSW, UNC, UNF, Metric etc, taps with parallel threads are shorter in length and are used for parallel threading.
These are used in sets of 2, All taps are right hand taps
CODE: GRO6568
BARCODE: 8901486096186
HEIGHT: 2.5cm
LENGTH: 17.5cm
WIDTH: 8.0cm
WEIGHT: 0.37kg
NOMINAL SIZE: 18 inch
PITCH: 2.50
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
GROZ TAP HAND CARBON STEEL SET M18X2.5
Taps are used for cutting internal threads in predetermined holes, These perform best in materials where the cutting action results in chips which break up readily and do not present problems of chip disposal, Taps are usually used in sets of 3: taper, second and bottom
Taper
Used to provide a quick & easy start, but this will not cut the thread down to the bottom of the hole
Second
Used to increase the size of cut
Bottom
Used for follow through right to the bottom to obtain full depth of thread.
As opposed to straight threads such as BSW, UNC, UNF, Metric etc, taps with parallel threads are shorter in length and are used for parallel threading.
These are used in sets of 2, All taps are right hand taps
CODE: GRO6568
BARCODE: 8901486096186
HEIGHT: 2.5cm
LENGTH: 17.5cm
WIDTH: 8.0cm
WEIGHT: 0.37kg
NOMINAL SIZE: 18 inch
PITCH: 2.50
