š Up to 70% Off Selected ItemsShop Sale
Victron Venus GX
Intuitive system overview - all you need to know
As soon as you 'log on' Venus GX provides an instant overview of your system: Battery state of charge; present power consumption; power harvest from PV; power provision from mains/generator.
The full power of Victron Remote Management
Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system-components which are connected to either your CCGX or Venus GX. It allows the remote user and installer login - from anywhere, at any time. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information.
Automatic Generator start/stop
The Venus GX can be programmed to auto-start your generator - triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of 'quiet' periods - avoiding accidental nuisance at dead of night.
Remote Console - control everything from anywhere
Remote Console provides visual access to the live data and settings of your Venus GX ...and because it's remote - you can do that from anywhere in the world.
ESS: Energy Storage Systems - 24-hour Monitoring
The Venus GX manages Energy Storage Systems. It keeps back-up batteries at 100%; kicks-in during power-cuts; and diverts excess (solar) power to self-consumption - saving you money. For examples and more detailed information see the ESS (Energy Storage System) manual.
Remotely Monitor your boat or motorhome electrics
Planning a trip? Remote monitoring of your Venus GX allows you to make sure your boat or motorhome is ready to go. Venus GX also allows you to talk to connected equipment from other manufacturers. And with Venus GX you can check the tanks, too.
Venus GX
The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of
Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers,
BMV battery monitors, Lynx Ion + Shunt, and more.
VRM Online Portal
All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an
impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.
Remote Console on VRM
The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via
VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.
Automatic Genset start/stop
A highly customizable start/stop system. Use state of charge, voltage, load, and other parameters.
Define a special set of rules for quiet times, and optionally a monthly test run.
The heart of the ESS ā Energy Storage System
The Venus GX is the Energy Manager in an ESS system. More information in the ESS manual:
https://www.victronenergy.com/live/ess:design-installation-manual
Data logging
When connected to the internet, all data is sent to the VRM Portal. When there is no internet
connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro
SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or
offline converted with the VictronConnect app, for analysis.
Supported products
- Multis and Quattros, including split-phase and three-phase systems. Monitoring and control
(on/off and current limiter). Changing configuration is possible (only remotely via the internet,
not without an internet connection).
- EasySolar 1600VA
- BlueSolar MPPT Solar Chargers with a VE.Direct port.
- BlueSolar MPPT 150/70 and the MPPT 150/85 with VE. Can port.
- SmartSolar MPPT 150/70 and the MPPT 150/100 with VE. Can port. When multiple BlueSolar
MPPTs or SmartSolar MPPTs with VE. Can are used in parallel, all the information is combined as
one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers.
- BMV-700 family can be connected directly to the VE. Direct ports on the Venus GX. Use the
VE.Direct Cable for this.
- BMV-600 family can be connected to the VE. Direct ports on the Venus GX. Requires an
accessory cable.
- Lynx Ion + Shunt
- Lynx Ion BMS
- Lynx Shunt VE.Can
- Skylla-i battery chargers
- NMEA2000 tank sensors
- A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking
purposes. The map on VRM will show the latest position.
- Fronius PV Inverters
When more than two VE. Direct products must be connected, USB can be used.
Internet connection
The Venus GX can be connected to the internet with an Ethernet cable and via Wi-Fi. The Venus GX has
no internal cellular modem: there is no slot for a sim-card. Use an off-the-shelf GPRS or 3G router
instead. See the blog post about 3G routers.
Tank level inputs
The tank level inputs are resistive: connect them to a resistive tank sender. Such tank senders are not
supplied by Victron. The tank level ports can each be configured to work with either European tank
senders (0 - 180 Ohm), or US (240 - 30 Ohm).
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Victron Venus GX
Victron Venus GX
Intuitive system overview - all you need to know
As soon as you 'log on' Venus GX provides an instant overview of your system: Battery state of charge; present power consumption; power harvest from PV; power provision from mains/generator.
The full power of Victron Remote Management
Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system-components which are connected to either your CCGX or Venus GX. It allows the remote user and installer login - from anywhere, at any time. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information.
Automatic Generator start/stop
The Venus GX can be programmed to auto-start your generator - triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of 'quiet' periods - avoiding accidental nuisance at dead of night.
Remote Console - control everything from anywhere
Remote Console provides visual access to the live data and settings of your Venus GX ...and because it's remote - you can do that from anywhere in the world.
ESS: Energy Storage Systems - 24-hour Monitoring
The Venus GX manages Energy Storage Systems. It keeps back-up batteries at 100%; kicks-in during power-cuts; and diverts excess (solar) power to self-consumption - saving you money. For examples and more detailed information see the ESS (Energy Storage System) manual.
Remotely Monitor your boat or motorhome electrics
Planning a trip? Remote monitoring of your Venus GX allows you to make sure your boat or motorhome is ready to go. Venus GX also allows you to talk to connected equipment from other manufacturers. And with Venus GX you can check the tanks, too.
Venus GX
The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of
Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers,
BMV battery monitors, Lynx Ion + Shunt, and more.
VRM Online Portal
All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an
impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.
Remote Console on VRM
The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via
VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.
Automatic Genset start/stop
A highly customizable start/stop system. Use state of charge, voltage, load, and other parameters.
Define a special set of rules for quiet times, and optionally a monthly test run.
The heart of the ESS ā Energy Storage System
The Venus GX is the Energy Manager in an ESS system. More information in the ESS manual:
https://www.victronenergy.com/live/ess:design-installation-manual
Data logging
When connected to the internet, all data is sent to the VRM Portal. When there is no internet
connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro
SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or
offline converted with the VictronConnect app, for analysis.
Supported products
- Multis and Quattros, including split-phase and three-phase systems. Monitoring and control
(on/off and current limiter). Changing configuration is possible (only remotely via the internet,
not without an internet connection).
- EasySolar 1600VA
- BlueSolar MPPT Solar Chargers with a VE.Direct port.
- BlueSolar MPPT 150/70 and the MPPT 150/85 with VE. Can port.
- SmartSolar MPPT 150/70 and the MPPT 150/100 with VE. Can port. When multiple BlueSolar
MPPTs or SmartSolar MPPTs with VE. Can are used in parallel, all the information is combined as
one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers.
- BMV-700 family can be connected directly to the VE. Direct ports on the Venus GX. Use the
VE.Direct Cable for this.
- BMV-600 family can be connected to the VE. Direct ports on the Venus GX. Requires an
accessory cable.
- Lynx Ion + Shunt
- Lynx Ion BMS
- Lynx Shunt VE.Can
- Skylla-i battery chargers
- NMEA2000 tank sensors
- A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking
purposes. The map on VRM will show the latest position.
- Fronius PV Inverters
When more than two VE. Direct products must be connected, USB can be used.
Internet connection
The Venus GX can be connected to the internet with an Ethernet cable and via Wi-Fi. The Venus GX has
no internal cellular modem: there is no slot for a sim-card. Use an off-the-shelf GPRS or 3G router
instead. See the blog post about 3G routers.
Tank level inputs
The tank level inputs are resistive: connect them to a resistive tank sender. Such tank senders are not
supplied by Victron. The tank level ports can each be configured to work with either European tank
senders (0 - 180 Ohm), or US (240 - 30 Ohm).
$52.53
Original: $175.09
-70%Victron Venus GXā
$175.09
$52.53Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Intuitive system overview - all you need to know
As soon as you 'log on' Venus GX provides an instant overview of your system: Battery state of charge; present power consumption; power harvest from PV; power provision from mains/generator.
The full power of Victron Remote Management
Victron Remote Management (VRM) provides you with full access to the very extensive controls and settings of all system-components which are connected to either your CCGX or Venus GX. It allows the remote user and installer login - from anywhere, at any time. This powerful application also provides for hassle-free diagnostic checks and analysis of archived information.
Automatic Generator start/stop
The Venus GX can be programmed to auto-start your generator - triggered by low-voltage; high-demand; or battery state of charge. It can be further tailored to delay ignition until the end of 'quiet' periods - avoiding accidental nuisance at dead of night.
Remote Console - control everything from anywhere
Remote Console provides visual access to the live data and settings of your Venus GX ...and because it's remote - you can do that from anywhere in the world.
ESS: Energy Storage Systems - 24-hour Monitoring
The Venus GX manages Energy Storage Systems. It keeps back-up batteries at 100%; kicks-in during power-cuts; and diverts excess (solar) power to self-consumption - saving you money. For examples and more detailed information see the ESS (Energy Storage System) manual.
Remotely Monitor your boat or motorhome electrics
Planning a trip? Remote monitoring of your Venus GX allows you to make sure your boat or motorhome is ready to go. Venus GX also allows you to talk to connected equipment from other manufacturers. And with Venus GX you can check the tanks, too.
Venus GX
The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of
Victron products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers,
BMV battery monitors, Lynx Ion + Shunt, and more.
VRM Online Portal
All readings are forwarded to our free remote monitoring website: the VRM Online Portal. To get an
impression, try the demo on https://vrm.victronenergy.com. See also the screenshots below.
Remote Console on VRM
The way to access the device for setting up, as well as monitoring, is via Remote Console. Either via
VRM, via the built-in WiFi Access Point, or on the local LAN/WiFi network.
Automatic Genset start/stop
A highly customizable start/stop system. Use state of charge, voltage, load, and other parameters.
Define a special set of rules for quiet times, and optionally a monthly test run.
The heart of the ESS ā Energy Storage System
The Venus GX is the Energy Manager in an ESS system. More information in the ESS manual:
https://www.victronenergy.com/live/ess:design-installation-manual
Data logging
When connected to the internet, all data is sent to the VRM Portal. When there is no internet
connection available, the Venus GX will store the data internally, up to 48 hours. By inserting a micro
SD-card or USB stick, more data can be stored. These files can then be uploaded to the VRM Portal, or
offline converted with the VictronConnect app, for analysis.
Supported products
- Multis and Quattros, including split-phase and three-phase systems. Monitoring and control
(on/off and current limiter). Changing configuration is possible (only remotely via the internet,
not without an internet connection).
- EasySolar 1600VA
- BlueSolar MPPT Solar Chargers with a VE.Direct port.
- BlueSolar MPPT 150/70 and the MPPT 150/85 with VE. Can port.
- SmartSolar MPPT 150/70 and the MPPT 150/100 with VE. Can port. When multiple BlueSolar
MPPTs or SmartSolar MPPTs with VE. Can are used in parallel, all the information is combined as
one. See also our blog-post about synchronizing multiple MPPT 150/70 solar chargers.
- BMV-700 family can be connected directly to the VE. Direct ports on the Venus GX. Use the
VE.Direct Cable for this.
- BMV-600 family can be connected to the VE. Direct ports on the Venus GX. Requires an
accessory cable.
- Lynx Ion + Shunt
- Lynx Ion BMS
- Lynx Shunt VE.Can
- Skylla-i battery chargers
- NMEA2000 tank sensors
- A USB GPS can be connected to the USB port. The data is sent to the VRM Portal for tracking
purposes. The map on VRM will show the latest position.
- Fronius PV Inverters
When more than two VE. Direct products must be connected, USB can be used.
Internet connection
The Venus GX can be connected to the internet with an Ethernet cable and via Wi-Fi. The Venus GX has
no internal cellular modem: there is no slot for a sim-card. Use an off-the-shelf GPRS or 3G router
instead. See the blog post about 3G routers.
Tank level inputs
The tank level inputs are resistive: connect them to a resistive tank sender. Such tank senders are not
supplied by Victron. The tank level ports can each be configured to work with either European tank
senders (0 - 180 Ohm), or US (240 - 30 Ohm).
